As we all know RC flying has emerged as the most exciting hobby nowadays; and it can make crazy to anyone irrespective of age and gender. RC float planes are like extra cheese on your pizza or burger i.e. RC float planes can add a number of challenges as well as more enjoyable RC flying experience on the water. This is something more exciting.
So if you have easy access to a flowing river or lake than you can go for RC float planes. This will advance your skills and techniques of RC flying. This article will provide you basic information related to the construction of RC float planes as well as its functions. You will also come to know how RC float planes are different from RC flying planes.
The constructions of the RC float planes:
The floats of RC planes are generally made from the foam which is sturdy and light in weight. Through pre-bent supports which slot directly into the landing gear slots on the base of the fuselage. A better prop which is generally supplied with the RC float set which is a core fact of float RC plane flying that extra thrust is required to conquer the extra weight and particularly haul which the floats generate both in water and in the air.
The single hull RC aircraft, which are also known as flying boats, are substitute configuration to the pontoon floats. The single hull RC aircraft are bigger than planes equipped with pontoon floats and the Consolidated PBY Catalina is a very famous subject matter for radio control.
Take off of RC float planes:
The basic variation between RC float planes and RC land planes is in the amount of drag encounter by them. While taking off, normal RC land airplanes encounter small amount of drag at a time of rolling along a flat and even runway. As far as RC float planes are concerned they encounter a great amount of drag, this is because floats aim and cut their way through the water surface tension.
The amount of drag is comparatively colossal in both the RC planes i.e. in the case of RC float planes until they start to travel on the water surface and in a case of RC airplanes, across the surface until they gets in the air. The amount of drag can be minimized considerably, throughout the stage of the takeoff.
The take off of RC float planes into the wind should be done whenever possible same as land RC planes. In a case of a major hack on the surface, flier should do his/her take off run equivalent to the stroke of the waves and this is may be considered as crosswind take off.
The technique is to clutch in more up elevator at the time of take-off run that what you do while taking off from the land. This trick will hold the nose of the device up and facilitate the floats from digging into the water. With the increase in the speed, flier must be able to slow down up elevators and allow the plane ride with the waves. Once the RC float plane has reached the take-off speed, the flier can gently lift the plane off the water with a few up elevators and sustain gentle and climb out from the river or lake.
Landing of RC float planes:
You would never wish to get wrong at the time of landing your RC float plane. The technique of landing your RC float plane on the water surface is to aim and land along with the lines of the waves and not perpendicular to the lines of waves. This will reduce the possibility of a float hollowing into the waves and the plane flicking over.
The drawback in this matter is, it generally means landing crosswind. But this is not at all a big challenge as the possibilities are that the wind may not be strong enough in a meanwhile, and if it was like that then you may not have taken off in the first. If there is no chop or a little chop on the water then you can land the RC float plane into the wind. A great amount of chop requires being taken into consideration while landing.
While landing your RC float plane you should come in with maximum flare and as slow as possible. This will allow the floats to touch the water gently. In this case, your plane should have a comparatively high nose-up position. Due to this reason awareness of your RC plane’s halting speed is equally important. To halt your plane when it is towards landing approach over the water surface is crucial.
For this reason, you must be good enough to land on dry land; if you are not good here you should first practice more and improve yourself on landing on land before trying to land on the water surface. It is also good for you to have plane retrieval system in place, an RC boat or an assistant in a real boat are good options in case your RC float plane could not find itself in the middle of the river or lake.
RC float plane is a great fun and if a small river, or a lake or good size pond is nearby you, you must take full benefit of it. Any large spread of calm water makes RC float plane flying a suitable place. This RC float plane flying is not less than any adventure for you. It is more exciting and has more thrill than your RC plane flying on land. If you are great RC flier on land than it won’t be difficult for you to fly float planes. You are only required to be more than perfect at landing your plane on land before trying landing on a water surface. And it is advisable for beginners to gain flying skills and practical knowledge before attempting RC float flying planes.